LED module light source
Product Features
■ The module light source can utilize secondary optical distribution to achieve efficient light distribution, improve lighting efficiency, and achieve energy-saving effects. Compared with traditional lamps, it has higher color rendering index. The power consumption of lamp modules with the same brightness is lower
■Long lifespan, low light decay; the light source has a lifespan of over 50,000 hours, with less than 3% light decay in one year
■ Matching four major brand drives, it can achieve intelligent dimming control. It can achieve time control, temperature control, and light control through mobile phones or PC terminals
■ Nationwide, the general practice for energy-saving transformation of old lamps is to use modular design, which facilitates installation, disassembly, and future maintenance, thus achieving a green city
Single module power :30w-60w
Rated voltage:DC30V-DC48V
CRI:>70
Light source brand:lumileds/CREE/OSRAM/PHILIPS
Luminous effciency:150lm/w
Color temp:3000k-6000k
LED life time :>5000h
IP grade:IP67
Beam angle ：140°*75°
Power factor :>0.95
Working temp:-30°-+55°
Size：L299*W70*H/ L270*W70*H/ L250*W70*H/ L210*W70*H
Photovoltaic panel
Solar panel parameters
- Nondestructive Scribing Technology Special cu�ng and soldering technologyleads to low hotspot risk
- Excellent weak light performance More power output in weak light condi�on, such as cloudy,morning and sunset
- Better Micro Crack Resistance Minimize the impact by micro crack by limiting cell damage and potentially extending area
- PID Resistance According to IEC TS 62804-1
ELECTRICAL CHARACTERISTICS
Module JHM5/72H535 JHM5/72H550 JHM5/72H555
STC NMOT STC NMOT STC NMOT
Peak Power(Pmax) 535 396 550 408 555 412
Maximum Power Voltage 41.6 37.6 42.2 38 42.4 38.2
Maximum Power Current(Imp) 12.86 12.55 12.98 10.68 13.1 10.78
Open-circuit Voltage (Voc) 49.4 45.4 49.6 45.9 49.8 46.1
Short-circuit Current( A) 13.79 11.66 13.93 11.28 14.07 11.37
Module Efficiency 20.70% 21.10% 21.48%
- DESCRIPTION
CLL12/2410LI-150W is solar controller for LED solar street light,it can be used for both Lead acid battery
and LifePo4/Li ion Lithium battery. This solar light controller is integrated with LED driver, so the led light
can’t have LED driver. And this also can save the cost of Led driver. The maximum conversion efficiency
reaches 96%. The output current can be adjusted for 4 time frames. With fully sealed waterproof design
and wide output voltage, the product applies to most LED solar street lights.
70W-280W Driving power Product feature
- Compact shell design, with excellent thermal performance
- Full power wide output current range (constant power)
- Lightning protection: Differential mode 6 kV, Common mode 10 kV
- Comprehensive protection: over-temperature protection, over-voltage protection, short-circuit protection
- IP66 / IP67 and suitable for UL dry, wet, and multiple water environments
- Suitable for hazardous environments classified as Class I, Division 2 in North America
- 5-year warranty
Solar controller
-
- DESCRIPTION
CLL12/2410LI-150W is solar controller for LED solar street light,it can be used for both Lead acid battery
and LifePo4/Li ion Lithium battery. This solar light controller is integrated with LED driver, so the led light
can’t have LED driver. And this also can save the cost of Led driver. The maximum conversion efficiency
When used for Lithium battery,the controller can be restarted to charge by solar panel after the protection board is powered off. - Optimized circuits and procedures,to improve the stability of the system greatly.
- It can adjust the power of load automatically by detecting the remaining capacity of the battery,which can extend the lighting time longer 90% compared with normal controllers.
- It can adjust the power of load automatically by detecting the remaining capacity of the battery,which can extend the lighting time longer 90% compared with normal controllers.
- Automatic time controlling at dusk and dawn.
Please note that the final cost depends on the customized service you require, the specifications of the raw materials used, the relevant national laws, and the distance of transportation. Take the example of booking a tall container of products:
Lithium battery cell CBA54174103-105
Advantage 1. The specific capacity of the material at a discharge rate of 0.2C is greater than 160mAh/g, and at a discharge rate of 1C it is greater than 150mAh/g. 2. Achieve mixing of different sizes of particles to enhance materials 3. Good processing performance, high capacity, good low temperature performance, and high cycle life 4. The improvement of material performance has increased the energy density of individual battery cells by more than 10%
Product parameter
Cell size :
thickness:54.3mm* width :174mm*shoulder height :114mm
Nominal capacity:105Ah
Nominal voltage:3.2V
Weight:2170g
Operating temperature:
charge :0 ℃<T<60℃
discharge :-20 ℃<T<60℃
Large capacity lithium battery pack for street lamps
Capacity:30Ah/150Ah
Voltage:DC12V/24V
Input current:5-35A
lithium cell :LiFePo
cycle index:3000 times
Warranty:5 years
Solar lights for wall tops or electric poles
light arm length:0.75-2m
light power :50W
PV panel power :6v/70w
light output lumens:2100-4500lumens
lithium battery:LiFePo 3.2v/60Ah
4-6M All in one solar light
light arm length:0.75-2m
Light power :50W
PV panel power :6v/70w
Light output lumens:2100-4500lumens
Lithium battery:LiFePo 3.2v/60Ah
Light Pole height:4-6M
